Page 1 of 1
T16 Head dowels
Posted: Sun Jan 25, 2009 7:27 pm
by Steve_l
Hi, made a start on getting the rover back on the road today and got the head off, all went alot easier than i thought (no seized bolts!) only thing is I snapped one of the plastic location dowels when taking the head off. Does any one know what the part number would be for these and of any places that would stock them?
Cheers
Steve
Posted: Sun Jan 25, 2009 8:55 pm
by E_T_V
An xparts supplier is the most obvious place to look, or rimmer bros if you want mail order. If you have a good engine place local they may have some lying about of the right size, they might even have some metal ones. At a pinch some landrovers used the T16 so a landy dealer should be able to get them too.
Posted: Sun Jan 25, 2009 9:42 pm
by Steve_l
Cool, thanks, sounds like they are easy enough to get hold of then.