Today I removed the tube from the EGR valve and sealed the tube off. I have also filled up with diesel and put Redex in. I have just changed the fuel filter and when it gets dark I will take the car for at least an hour's run along the motorway. After that I do not have any ideas. Anyone tell me wha...

I will try plugging the pipe and thank you for the picture as it explains a lot. Also I will get some injector cleaner. Do you think the bio fuel was the problem then. Luckily I have not put more than 2 full tanks in.
Should I change the fuel filter. Many thanks for your help.

Light grey. I do not know what the EGR valve is

I have a Rover 429sli(D). 1996. Had it about 3 weeks. Found Bio Fuel (man says 50 per cent diesel and 50 per cent Bio is the mix). The last few days I notice that on ticking over or when changing gear there is a lot of smoke from the exhaust. It does not smell oily or anything and the car car runs a...

I had to take the door trim off. Be very careful with the interior door handle as I broke the plastic clip that keeps the bar that moves the door lever in place on the door handle. I cannot get new ones except from Brindley, off the Penn Road in Wolverhampton. Lower the window down and you can see t...

Thank you. Question is who does them and what sort of price am I looking at as I wouldn't know how to even begin that sort of work.

As I have only just had the rover 420sli(d) I do not know if the Cam Belts have been renewed. The car has done 93.000 miles so anyone give me advice please.

Found a Rover Breakers place called Best Of British. Phone 0121 526 5444/5506. They are based in Darlaston, West Midlands and are very helpful. They looked at my window and showed me how to reajust it. Now at least I can put the window down third of way and back up with no problem. They do new regul...

Thanks for reply. The problem is the quide at the end of the door part that has the door lock I think. The window seems to open level and is firmly fixed into the bottom. Just will not seat itself properly.

Thanks. So really if you have alloy wheels you need to get a proper set of locking wheel nuts. Thank you again